• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 62 21 87757225
  • 6281220237140
Rubber Lagging Pulley

Beltram Pulley Lagging eliminates belts silppage, increases pulley life and improves water sheeding which means increased productivity.

Description:

Black SBR Rubber compound normal quality with good physical properties.

Application:

Pulley lagging for drive pulley, snub pulley, bench pulley and tak up pulley.

Type: Plain, Chevron and diamond groove

Thickness: 10, 12 and 15 mm

Wide: 2,000 mm

Length: 10,000 mm

Paramater Measurement PhysicalValues DINStandard
Specific gravity g / cm3 1.6 53479
Shore hardness Shore A 60 – 70 53505
Tensile strength N / mm2 15.0 53505
Elongation at break % 450 53504
Abrasion Mm3 110 53516

BELTRAM DRUM LINING

Unprofiled
For tail drums, snub drums and take-up drums as well as for plain drive drum laggings.
\"\"
Shore Spec.Weight Dimension
mm
 45  1.02  1200 x 10.000
 60  1.16  1200 x 10.000
70 1.20 1200 x 10.000
Dimensions available, thickness: 8, 10, 12

BELTRAM PULLEY LAGGING

With Maxi-Diamond
For pulleys larger than 600 mm diameter
\"\"
Shore Spec.Weight Dimension mm
45 1.02 1200 x 10.000
60 1.16 1200 x 10.000
70 1.20 1200 x 10.000
Dimensions available, thickness: 8, 10, 12

BELTRAM PULLEY LAGGING

With Mini-Diamond
For pulley up to 700 mm diameter
\"\"
Shore Spec.Weight Dimension mm
45 1.02 1200 x 10.000
60 1.16 1200 x 10.000
70 1.20 1200 x 10.000
Dimensions available, thickness: 8, 10, 12

 

Softer rubber materials with high elongation, designed to absorb high deformation pressures caused by the material handled and to repel deposits.

For using special positions

Special positions are: sticky_left, sticky_right, notice, tool_bottom. You can use them for any module type. For using this, please go to Module Manager and config your module to your desired position.

You can disable by:

  • Go to Administrator » Template Manager » Your_Template » Tab: Advanced » Use special positions » select: No for all special positions
  • Go to Administrator » Module magager » Your_Module(by postion: sticky_left/stickey_right/notice/tool_bottom) » Status: Unpublish for that module

For customize module in special position

The solution is using Module Class Suffix. You can customize button, module content follow Module Class Suffix

E.g. Module Class Suffix: bg-white @bullhorn then:
- Class of buttom is 'ico-bullhorn'. If without @... the default is 'icon-pushpin'
- Class of module is 'bg-white'

Template Settings

Color

For each color, the params below will give default values
Blue Red Oranges Green Purple Pink

Body

Background Color
Text Color

Header

Background Color

Footer

Select menu
Google Font
Body Font-size
Body Font-family
Direction