• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 62 21 5750868 (Hunting)
  • 62 811 1399 926 (Whatsapp)
Belt Cleaner Accessories

Water Spray Pole System

Specially designed to help dislodge carryback fines embedded in the belt’s surface and enhance the performance of Eliminator® belt cleaners.


Features and Benefits:

·        Spray nozzles that are angled 45 degrees to the belt for a high pressure, low volume spray

·        Suspends fines, making belt cleaning easier and extending blade life

·        Easy-to-install system that is built for durability and minimal maintenance

·        Pressure regulator/control panel, a stainless steel pole, and powder-coated steel clamping brackets

·        Stabilizing Return Roller and Stabilizing Roller Bracket Kit


Designed to enhance secondary cleaner performance on belts that have become cupped, begun to flap, or have low tension.


Features and Benefits:


·        Designed to hold the belt flat and stable, so cleaner blades can make optimal belt contact

·        Stabilizing Roller Bracket that can adjust horizontally and vertically to fit any conveyor

·        Roller retainer slots that are built into both the upper and lower portions of the brackets so return roller can height can be adjusted



Stabilizing Roller Bracket Kit –– for use with your own on-site return idler roller

Live-Shaft Hold-Down Roll


Improves secondary cleaner performance on high-pressure, heavy-duty belts by preventing cupped, flapping, or loose belts.


Features and Benefits:


·        Holds high-tension belts flat, ensuring excellent contact surface between the belt and secondary cleaner.

·        HDR bracket kit allows vertical adjustment


·        Overall roll length is belt width + 6" (150 mm) and overall shaft length is belt width + 30" (750 mm)

For using special positions

Special positions are: sticky_left, sticky_right, notice, tool_bottom. You can use them for any module type. For using this, please go to Module Manager and config your module to your desired position.

You can disable by:

  • Go to Administrator » Template Manager » Your_Template » Tab: Advanced » Use special positions » select: No for all special positions
  • Go to Administrator » Module magager » Your_Module(by postion: sticky_left/stickey_right/notice/tool_bottom) » Status: Unpublish for that module

For customize module in special position

The solution is using Module Class Suffix. You can customize button, module content follow Module Class Suffix

E.g. Module Class Suffix: bg-white @bullhorn then:
- Class of buttom is 'ico-bullhorn'. If without @... the default is 'icon-pushpin'
- Class of module is 'bg-white'

Template Settings


For each color, the params below will give default values
Blue Red Oranges Green Purple Pink


Background Color
Text Color


Background Color


Select menu
Google Font
Body Font-size
Body Font-family