• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 62 21 87757225
  • 6281220237140

Dunlop has developed conveyor belts that are heat resistant as well as wear resistant, resulting in a much longer operational lifespan. 

High temperatures can do serious damage to the actual conveyor belt carcass itself. Choosing the correct thickness of the cover is essential because the cover acts as a barrier between the heat source and the carcass.

Dunlop heat resistant conveyor belts have been developed and refined over many years so that they are more than capable of meeting the demands of even the most extreme conditions, which in some cases can involve temperatures as high as 400°C.

Industries where Dunlop heat resistant conveyor belts are used with great success include the cement industry, recycling plants, the steel industry, foundries, the chemical industry and the petro-chemical industry. 

Betahete – Heat and wear resistant, for materials at moderate temperatures. (Duration: 160°C. Peak 180°C) 

Starhete – Increased heat resistance, for materials at controlled high temperatures. Starhete also possess very good chemical and oil resistant properties. (Duration: 180°C. Peak 220°C) 

Deltahete – Superior heat resistance for heavy duty service conditions, at temperatures up to 400°C for a short period such as coke, clinker etc. (Duration: 200°C. Peak 400°C.) For more information, check out the link to the pdf "Deltahete technical overview" at the bottom of this page, with tests against competitors of Class T3/200°C belts.

For using special positions

Special positions are: sticky_left, sticky_right, notice, tool_bottom. You can use them for any module type. For using this, please go to Module Manager and config your module to your desired position.

You can disable by:

  • Go to Administrator » Template Manager » Your_Template » Tab: Advanced » Use special positions » select: No for all special positions
  • Go to Administrator » Module magager » Your_Module(by postion: sticky_left/stickey_right/notice/tool_bottom) » Status: Unpublish for that module

For customize module in special position

The solution is using Module Class Suffix. You can customize button, module content follow Module Class Suffix

E.g. Module Class Suffix: bg-white @bullhorn then:
- Class of buttom is 'ico-bullhorn'. If without @... the default is 'icon-pushpin'
- Class of module is 'bg-white'

Template Settings

Color

For each color, the params below will give default values
Blue Red Oranges Green Purple Pink

Body

Background Color
Text Color

Header

Background Color

Footer

Select menu
Google Font
Body Font-size
Body Font-family
Direction