• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 62 21 5750868 (Hunting)
  • 62 811 1399 926 (Whatsapp)

Solvent Cleaning Fluid


- Cleaning Rubber

- Cleaning Steel

- Buffing Rubber



1. Belt Slicing

2. Belt Repair

3. Pulley Lagging

4. Rubber Linning



Form: Liquid

Color: Clear, colorless

Odor: Mild petroleum smell

Flash Point: 40°C (104°F)

Vapor Pressure: 1.73 mmHg at 68°F (estimate)

Specific Gravity: 0.75 (at 60°F)

Water Solubility: <0.01% at 71°F

Vapor Density: 5.03

Boiling Point: 163-176°C (325-349°F)


Freezing Point: -57°C (-71°F)



Eyes: Flush eyes with large quantities of water. If irritation remains, seek medical attention.

Skin: Wash with soap and water. Remove severely contaminated clothing (including shoes) and launder before reusing.

Inhalation: Using proper respiratory protection, immediately remove affected person from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Seek

immediate medical attention.

Oral: If swallowed, do NOT induce vomiting. Keep at rest. Get

prompt medical attention.



Storage: Keep drums well sealed in a well-ventilated area. Store

between 5°C (41°F) and 35°C (95°F) and away from

incompatible materials. Avoid open flames or sparks.

Avoid container over-heating by protecting from sunlight.

Material will accumulate static charges which may cause

electric spark; use proper ground procedures. Do not

pressurize, cut, heat or weld containers. Do not reuse

empty containers without commercial cleaning or


Handling: Where prolonged exposure and use is likely, wear safety

glasses with side shields, long sleeves and chemical

resistant gloves. Where splashing is unlikely but may

occur, wear protective eye wear.



Transport: Non-bulk: ground transport only, ORM-D

UN number: 1866

ADR class: 3.31°C

IMDG class: 3.3°C, page 3375, Ems 3.07, Mfag311

RINA class: 3C.46

IATA class: 3 gr 3°

Packaging Group: III



For using special positions

Special positions are: sticky_left, sticky_right, notice, tool_bottom. You can use them for any module type. For using this, please go to Module Manager and config your module to your desired position.

You can disable by:

  • Go to Administrator » Template Manager » Your_Template » Tab: Advanced » Use special positions » select: No for all special positions
  • Go to Administrator » Module magager » Your_Module(by postion: sticky_left/stickey_right/notice/tool_bottom) » Status: Unpublish for that module

For customize module in special position

The solution is using Module Class Suffix. You can customize button, module content follow Module Class Suffix

E.g. Module Class Suffix: bg-white @bullhorn then:
- Class of buttom is 'ico-bullhorn'. If without @... the default is 'icon-pushpin'
- Class of module is 'bg-white'

Template Settings


For each color, the params below will give default values
Blue Red Oranges Green Purple Pink


Background Color
Text Color


Background Color


Select menu
Google Font
Body Font-size
Body Font-family