• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 62 21 87757225
  • 6281220237140

Beltram Industrial Ceramics Alumina Tiles provide excellent abrasion and impact resistance for Mining and Industry applications. If abrasion resistance and impact resistance are a problem at your installation you can be sure that our wear solutions and Industrial Ceramic Tiles will assist to help extend the life of your bulk handling equipment and keep your systems operating at maximum levels.

Our Tuff Stuff Wear Protection Industrial Ceramic Tiles are produced with the highest quality alumina ceramic, 92% high-grade alumina made from pure aluminium oxide. We offer only the highest wear materials available for abrasion protection.

Beltram Tuff Stuff Alumina Ceramic Tiles deliver superior wear resistance, excellent mechanical and anti corrosion properties. We can supply alumina tiles in a variety of standard sizes and shapes that can be installed easily and economically in any situation. It is recommended that beltram Tuff Stuff Ceramic Tile Adhesive be used for attaching the Alumina tiles where applicable.

Contact Us or representative for all your requirements including specialised shapes and sizes.

Industrial Ceramic Tiles - Alumina Ceramic Profile 

Alumina content % 92
Density g/cm3 3.60
Young’s modulus Gpa 270
Shear modulus Gpa 110
Hardness, vickers 20℃ kg/mm2 1100
Flexural strength 20℃ Mpa 275
Weibull modulus 20℃ Gpa 24
Compressive strenghen 20℃ Mpa 2480
Fracture toughness 20℃ Mpa m1/2 3.75
Thermal conductivity 20℃ (W/m-k) 18
Thermal expansion 20℃~800℃ ×10-6/℃ 8.30
Thermal shock resistance Δ Tc 250
Maximum use temperature 1250
Water absorption % None
Gas permeability - None
Grain size equivalent diameter μm 3.4

For using special positions

Special positions are: sticky_left, sticky_right, notice, tool_bottom. You can use them for any module type. For using this, please go to Module Manager and config your module to your desired position.

You can disable by:

  • Go to Administrator » Template Manager » Your_Template » Tab: Advanced » Use special positions » select: No for all special positions
  • Go to Administrator » Module magager » Your_Module(by postion: sticky_left/stickey_right/notice/tool_bottom) » Status: Unpublish for that module

For customize module in special position

The solution is using Module Class Suffix. You can customize button, module content follow Module Class Suffix

E.g. Module Class Suffix: bg-white @bullhorn then:
- Class of buttom is 'ico-bullhorn'. If without @... the default is 'icon-pushpin'
- Class of module is 'bg-white'

Template Settings

Color

For each color, the params below will give default values
Blue Red Oranges Green Purple Pink

Body

Background Color
Text Color

Header

Background Color

Footer

Select menu
Google Font
Body Font-size
Body Font-family
Direction