• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • 62 21 5750868 (Hunting)
  • 62 811 1399 926 (Whatsapp)

Linatex® premium rubber is a 95% natural rubber that exhibits outstanding resilience, strength and resistance to cutting, tearing and abrasion. With more than 80 years experience in handling aggressive materials, Linatex is still ranked as the premium wear resistant rubber for sliding or wet abrasion service..

It is our unique and patented manufacturing process that gives Linatex its extraordinary physical properties and outstanding performance. The Linatex process, unlike other processes, causes minimal mechanical disturbance to the molecular structure of the finished rubber, resulting in significant cost benefits to the user. With Linatex there is no equivalent when it comes to wet abrasion. 


  • Proven ‘Best in Field’ performance in fine slurry abrasion
  • Excellent resistance to cutting and tearing
  • High resilience and low modulus
  • Resistance to a wide range of Chemicals


The uses of Linatex® premium rubber are almost unlimited
  • Pipe lining
  • Chute lining
  • Tank linings
  • Hydrocyclones
  • Pumps
  • Hoses
  • Valve liners
  • Belting


Standard Sheet size: 9.25 m x 1.23 m nominal (approx. 30ft x 4 ft)

Part sheets available to order

Standard thickness range: 1.5 mm to 35.0 mm (approx. 1/16” to 13/8”)

Moulded components available from stock and made to order


For using special positions

Special positions are: sticky_left, sticky_right, notice, tool_bottom. You can use them for any module type. For using this, please go to Module Manager and config your module to your desired position.

You can disable by:

  • Go to Administrator » Template Manager » Your_Template » Tab: Advanced » Use special positions » select: No for all special positions
  • Go to Administrator » Module magager » Your_Module(by postion: sticky_left/stickey_right/notice/tool_bottom) » Status: Unpublish for that module

For customize module in special position

The solution is using Module Class Suffix. You can customize button, module content follow Module Class Suffix

E.g. Module Class Suffix: bg-white @bullhorn then:
- Class of buttom is 'ico-bullhorn'. If without @... the default is 'icon-pushpin'
- Class of module is 'bg-white'

Template Settings


For each color, the params below will give default values
Blue Red Oranges Green Purple Pink


Background Color
Text Color


Background Color


Select menu
Google Font
Body Font-size
Body Font-family